A reliable network starts with clean and maintained connectors. Therefore, before using a connector, it is essential to be sure that it is clean and without failures and if not, the cleaning has to be done. One of the way of cleaning consists in "wet cleaning".
The Cleanoptic Isopropyl Alcohol (IPA) is the most common cleaner used for optical fibers. It is particularly adapted because it cleans efficiently without damaging the optical face and without residues.
It is important to remember that IPA should be stored and used only in a clean, cool and ventilated area, avoiding inhalation of vapors and repeated or prolonged contact of the liquid with skin or clothing.
Available in bottle of 0.25L and 1L, and container of 5L.
It is packaged in plastic container for easy use and practical opportunity to repackage into smaller packages.
Secure cap and drops count on the bottle of 1L.
Especially developed for the cleaning of high resistant contaminants such as index gel or oils, the CLEANOPTIC Degreaser is very efficient and dries very quickly on optical fibers.
Available in bottle of 1L and container of 5L, large cap on the bottle of 1L to plunge the cable directly into the bottle.
Both CLEANOPTIC solvents can be packed -on request- in a wide range of different containers (plastic or glass distributors, with or without locking in 250ml, in dispenser with locking plastic for the 100ml or 170ml, 15ml or 250ml bottle, bottle with drop count in 30ml).